XLC-DVX FIR Preset Notes
9-30-08  MDK

The preset options in this folder are the XLC-DVX FIR v1.0 (standard EV flat preset) and the XLC-DVX FIR v1.0M (Musical preset). You may choose which preset best suits your tastes. (NOTE: Do not mix the standard preset with the musical preset.)

Subwoofers are time-aligned and level-adjusted to be flown in the same array, or in an array directly next to the main hang. The subwoofer level is set for a 2/3 ratio of subs to top boxes. Subwoofer output level and alignment delay may need to be adjusted for your application.

The XLC127DVX and XLC907DVX presets are time-aligned to allow multi-pattern array creation. All presets provided in this folder contain 80Hz crossovers between the subwoofers and the top boxes. For higher power application, 100Hz crossover presets are available upon request.

We created these presets for use with the TG-series amplifiers equipped with RCM-26 DSP cards. These presets can also be used in the Netmax N8000 processor with FIR Drive, when FIR Drive is released, At this time we ask that you contact the EV Technical Support Group if you would like to use an N8000 for FIR presets.

If you have other questions or comments about the presets, please contact EV Technical Support at:

Pro Audio - Technical Support Group 
Bosch Communications Inc
12000 Portland Ave S 
Burnsville MN  55337-1522
USA

Phone: 800-392-3497 
FAX:   952-884-0043 
Web:   www.boschcommunications.com 
 